| Page 1 of 7 |
|
|
|
|
| Member Price: $ 25.00 |
| Non-Member Price: $ 50.00 |
|
| The TIPs are modeled on the popular Concrete in Practice (CIP) series. Also written in a "What? Why? and How?" scheme, the TIP series is intended for industry personnel to enhance internal education on general quality control and technical topics.
The 16 topics currently available are:
TIP 1 - Quantifying Concrete Quality
TIP 2 - Establishing the Required Average Strength of Concrete
TIP 3 - Aggregate Sampling for Laboratory Tests
TIP 4 - Aggregate Sample Reduction for Laboratory Tests
TIP 5 - Capping Cylindrical Concrete Specimens with Sulfur Mortars and Unbonded Caps
TIP 6 - Aggregate Moisture and Making Adjustments to Concrete Mixtures
TIP 7 - Creating and Using Three Point Curves for Laboratory Trial Batches
TIP 8 - Concrete Yield
TIP 9 - Density of Structural Lightweight Concrete
TIP 10 - Mixing Water Quality for Concrete
TIP 11 - Testing Concrete Cores
TIP 12 - Slump Loss of Concrete
TIP 13 - Chloride Limits in Concrete
TIP 14 - Time of Setting of Concrete Mixtures
TIP 15 - Estimating Concrete Strength using Maturity
TIP 16 - Evaluating Strength Test Results
TIP 17 - Drying Shrinkage of Concrete
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Density of Structural Lightweight Concrete" - Discusses the determination and relationship between oven-dry, equilibrium and fresh bulk density of lightweight concrete as covered in ASTM C567. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Concrete Yield" - Outlines process for determining yield of concrete and evaluating problems with yield. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Creating and Using Three Point Curves for Laboratory Trail Batches" - Outlines the process of developing lab trial batch information for mixture submittals. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Aggregate Moisture and Making Adjustments to Concrete Mixtures" - Outlines concepts on aggregate moisture for mixture proportioning and production of concrete. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Capping Cylindrical Concrete Specimens with Sulfur Mortars and Unbonded Caps" - Summarizes the key points in the applicable standards for capping strength specimens and the reasons for these requirements. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Aggregate Sample Reduction for Laboratory Tests" - Addresses procedures to properly reduce the size of a larger field sample to a smaller size that is required for laboratory tests. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Aggregate Sampling for Laboratory Tests" - Discusses procedures to ensure that samples obtained for quality control tests are representative of the stockpiles or other storage locations from where they are obtained. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
|
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Establishing the Required Average Strength of Concrete" - Summarizes the general process of establishing the required strength for concrete based on the strength specified in project specifications in accordance with ACI standards. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
|
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
|
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| This TIP topic discusses the mechanisms of volume change and factors that impact shrinkage of concrete. It provides guidance on developing concrete mixtures for shrinkage specifications and the test method for shrinkage. |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| This TIP provides guidance on evaluating strength test results used for acceptance of concrete to determine whether the testing procedures and test results indicate deficiencies in testing practices (8 pages). |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| TIP 15 discusses a process for estimating in-place strength of concrete using one of the methods outlined in ASTM C1074, Practice for Estimating Concrete Strength by the Maturity Method. The TIP discusses developing the strength-maturity relationship, validation of the relationship and estimating in-place strength for scheduling construction activities. |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| TIP 14 discusses the factors that impact the setting characteristics of concrete and outlines the procedure and determination of the time of setting by ASTM C403, Time of Setting of Concrete Mixtures by Penetration Resistance. |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| TIP 13 addresses the limits on internal chlorides in concrete as addressed in the Building Code, ACI 318. It discusses reasons for the limits, sources of internal chlorides, testing for chlorides and discusses the calculation of chloride content in concrete from the mixture ingredients. |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Slump Loss of Concrete" Discusses the factors that impact the change in slump of concrete due to temperature and delivery time, and the factors that can be addressed to control slump loss. |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Testing Concrete Cores" discusses the procedures used for obtaining core specimens for evaluation of strength of concrete in the structure and the evaluation of core strength data. |
|
|
Add to Cart
|
|
|
|
|
|
|
|
| Member Price: $ 100.00 |
| Non-Member Price: $ 200.00 |
|
| The TIPs are modeled on the popular Concrete in Practice (CIP) series. Also written in a "What? Why? and How?" scheme, the TIP series is intended for industry personnel to enhance internal education on general quality control and technical topics.
The 16 topics currently available are:
TIP 1 - Quantifying Concrete Quality
TIP 2 - Establishing the Required Average Strength of Concrete
TIP 3 - Aggregate Sampling for Laboratory Tests
TIP 4 - Aggregate Sample Reduction for Laboratory Tests
TIP 5 - Capping Cylindrical Concrete Specimens with Sulfur Mortars and Unbonded Caps
TIP 6 - Aggregate Moisture and Making Adjustments to Concrete Mixtures
TIP 7 - Creating and Using Three Point Curves for Laboratory Trial Batches
TIP 8 - Concrete Yield
TIP 9 - Density of Structural Lightweight Concrete
TIP 10 - Mixing Water Quality for Concrete
TIP 11 - Testing Concrete Cores
TIP 12 - Slump Loss of Concrete
TIP 13 - Chloride Limits in Concrete
TIP 14 - Time of Setting of Concrete Mixtures
TIP 15 - Estimating Concrete Strength using Maturity
TIP 16 - Evaluating Strength Test Results
TIP 17 - Drying Shrinkage of Concrete |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Mixing Water Quality for Concrete" - Discusses the requirements of ASTM C1602 to qualify non-potable sources of water for use as mixing water in concrete. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 10.00 |
| Non-Member Price: $ 20.00 |
|
| "Quantifying Concrete Quality" - Provides ideas on identifying items to measure and quantify the impact of a quality goal that positively impacts the company’s bottom line. (In packages of 10) |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 66.00 |
| Non-Member Price: $ 264.00 |
|
| This informative binder published by ACPA includes technical publications on streets and local roads organized into six categories: Design, Construction, Whitetopping (including ultra-thin), Intersections, Repairs, and the Curb and Gutter Manual. It is an important reference for city and county engineers and their consultants and an excellent training guide on these subjects. #2PTB200P |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 6.00 |
| Non-Member Price: $ 24.00 |
|
| 11" x 8.25" Glossy decal listing the hazards of fresh concrete in Spanish. #2PSD7 |
|
|
Add to Cart
|
|
|
|
|
|
|
| Member Price: $ 8.00 |
| Non-Member Price: $ 24.00 |
|
| 11" x 8.25" Glossy decal listing the hazards of fresh concrete. #2PSD6 |
|
|
Add to Cart
|
|
|
| Page 1 of 7 |